BWE/BWED Type Two-stage Cycloidal Gear Reducer
A cycloidal gear reducer is a new transmission device with planetary transmission principle and cycloidal gear meshing. All transmission devices of cycloidal pinwheel reducers can be divided into three parts: input, deceleration, and output. Dislocation on the input shaft is equipped with a 180 ° of the eccentric double sleeve, turn on the eccentric sleeve is fitted with two called arms of roller bearing, the formation of H, two cycloid gear center hole is the eccentric sleeve on the turning arm bearing raceway, and by a group of cycloid gear and pin gear mesh circular permutation needle, to form tooth difference, for the internal meshing gear reducer is institutions.
As one of the cyclo gear reducer manufacturers, suppliers, and exporters of mechanical products, We offer cyclo gear reducer and many other products. Please get in touch with us for details.
Mail:[email protected]
A cycloidal gear reducer is a new transmission device with planetary transmission principle and cycloidal gear meshing. All transmission devices of cycloidal pinwheel reducers can be divided into three parts: input, deceleration, and output. Dislocation on the input shaft is equipped with a 180 ° of the eccentric double sleeve, turn on the eccentric sleeve is fitted with two called arms of roller bearing, the formation of H, two cycloid gear center hole is the eccentric sleeve on the turning arm bearing raceway, and by a group of cycloid gear and pin gear mesh circular permutation needle, to form tooth difference, for the internal meshing gear reducer is institutions (to reduce friction, in a small ratio of speed reducer, the hand with needle teeth on the gear set).
Type
|
Allowable Torque
|
Model
|
Single-stage motor direct coupling
|
100-29400N.m
|
Single stage:
BW , BWD , XW , XWD , BL , BLD , XL , XLD ,
Two-stage:
BWE, BWED, XWE, XWED, BLE, BLED, XLE, XLED,
|
Two-stage motor direct coupling
|
||
Vertical installation
|
||
Horizontal installation
|
Product Specifications
Products Description:
1. transmission ratio. The transmission ratio of the first stage reduction is 1/6 – 1/87. The transmission ratio of the two-stage reduction is 1/99 – 1/7569; the transmission ratio of the three-stage is 1/5841 – 1/658503. In addition, according to the need, the speed ratio can be adopted to reach the designated size.
2. high transmission efficiency. As the meshing parts of the rolling meshing, the general level of transmission efficiency of 90% – 95%.
3. compact structure, small size, lightweight. Volume can be reduced by 2/1 – 2/3 than the ordinary cylindrical gear reducer.
4. fewer faults, long life. The main drive meshing parts are made of bearing steel, so the mechanical properties and wear resistance are good, and because of the rolling friction, the fault is less, and the service life is long.
5. smooth and reliable operation. Due to the transmission process for the multi-tooth meshing, so make the operation is stable and reliable, with low noise.
6. easy to assemble and disassemble, easy to repair.
7. overload capacity, impact resistance, and inertia torque are small and suitable for starting frequent and forward and reverse transfer characteristics.
Application Field
Conditions of Use:
2. The rated revolution of the input shaft is 1500 revolutions per minute, and it is recommended to use a 6-pole motor with 960 revolutions per minute when the input power is greater than 18.5 KWH.
3. horizontal installation cycloid gear reducer working position is horizontal. When installing the largest horizontal tilt Angle is generally less than 15 °. Other measures should be taken in more than 15 ° guarantee adequate lubrication and prevent leakage.
4. The output shaft of cycloidal pinwheel reducer cannot be subject to larger axial force and radial force, and other measures shall be taken when there are larger axial force and radial force.
Characteristics of Transportation and Packaging:
● Short delivery period,to ensure timely delivery.
● Tight packing,to ensure the products are not damaged during transportation.
● Various modes of transportation,to ensure safe and timely transportation.
● Follow up the whole process of order,to ensure product delivery to customers.
● Long shelf life, to ensure customer experience.