BLE/BLED Type Two-stage Cycloidal Gear Reducer
A cyclo reducer comprises an input shaft, an eccentrically mounted bearing, a cycloidal disc, ring pins, output rollers, and an output shaft. The input shaft drives the path that turns the disc. Because it is mounted eccentrically, the disc does not rotate around a single center point but rotates off-center, closer to some ring pins than others. Output rollers fit through holes that are slightly larger in diameter than the rollers to achieve a steady rotation of the output shaft from the wobbling movement of the disc.
As one of the cyclo gear reducer manufacturers, suppliers, and exporters of mechanical products, We offer cyclo gear reducer and many other products. Please get in touch with us for details.
Mail:[email protected]
A cyclo reducer comprises an input shaft, an eccentrically mounted bearing, a cycloidal disc, ring pins, output rollers, and an output shaft. The input shaft drives the path that turns the disc. Because it is mounted eccentrically, the disc does not rotate around a single center point but rotates off-center, closer to some ring pins than others. Output rollers fit through holes that are slightly larger in diameter than the rollers to achieve a steady rotation of the output shaft from the wobbling movement of the disc.
Product Specifications
Product Characteristics
(1) High-Speed Ratio and High Efficiency
Single-stage transmission can achieve a deceleration ratio of 1:87, and the efficiency is over 90%. If multi-stage transmission, the deceleration ratio is more significant.
(2) Compact structure and small volume
Because the planetary transmission principle is adopted, the input shaft and the output shaft are on the same axis, so the structure is compact, and the volume is small.
(3) Smooth operation and low noise
Cycloidal pin teeth have many meshing teeth, a significant overlap coefficient, and a smooth mechanism, which limits vibration and noise to a minimum.
(4) Reliable use and long service life
Because the main parts are bearing steel, high strength is obtained by quenching treatment (HRC58-62), and rolling friction are used in some transmission contacts, which is durable and has a long service life.
Application Field
Conditions of Use:
2. The rated revolution of the input shaft is 1500 revolutions per minute, and it is recommended to use a 6-pole motor with 960 revolutions per minute when the input power is greater than 18.5 KWH.
3. horizontal installation cycloid gear reducer working position is horizontal. When installing the largest horizontal tilt Angle is generally less than 15 °. Other measures should be taken in more than 15 ° guarantee adequate lubrication and prevent leakage.
4. The output shaft of cycloidal pinwheel reducer cannot be subject to larger axial force and radial force, and other measures shall be taken when there are larger axial force and radial force.
Characteristics of Transportation and Packaging:
● Short delivery period,to ensure timely delivery.
● Tight packing,to ensure the products are not damaged during transportation.
● Various modes of transportation,to ensure safe and timely transportation.
● Follow up the whole process of order,to ensure product delivery to customers.
● Long shelf life, to ensure customer experience.