China Best Sales Worm Gear Reducer for PV Cpv Solar Tracker comer gearbox

Product Description

VH7 slewing drive is a good solution to PV,CPV,CSP solar tracker system tracker system The first set of double enveloping slewing drive in domestic is developed by CZPT Drive, which is put into batch production. CZPT Drive has built a long-term cooperation with some famous companies.

Solar trackers increase the efficiency of solar systems by providing more direct sunlight on the collectors. Depending on the location and the specific system, 25% to 40% more energy can be harvested with tracking than without it.The slewing drive gear motor is the key mechanical executive to ensure the solar tracking running.

Model

VH7

Working Life

25 years

Brand

Coresun Drive

Available Load Weight

50-200kg

IP Class

IP65

Output Torque

6300N.m

Tilting Moment Torque

10KN.m

Holding Torque

45KN.m

Mounting Bolts

M120

Electrial Motor

24VDC, 220AC, 380VAC 

Gear Ratio

61:1

Efficiency

40%

Coresun Drive Equipment HangZhou Co., Ltd. Slewing drives function with standard worm technology, in which the worm on the horizontal shaft acts as the driver for the gear. The rotation of the horizontal screw turns a gear about an axis perpendicular to the screw axis. This combination reduces the speed of the driven member and also multiplies its torque; increasing it proportionally as the speed decreases. The speed ratio of shafts depends CZPT the relation of the number of threads on the worm to the number of teeth in the worm wheel or gear.

Slewing drive is also called slewing gear drive or slewing reducer, etc. It is typically used in aerospace area, solar power systems, wind turbines, satellite broadcasting system, and engineering machinery like truck cranes, and man lifts, etc. Recently years, it has been prosperously used in photovoltaic power generation systems.Slewing drive is used in solar energy industry, users have to choose an ideal 1 according to the actual area of solar panels. Broadly speaking, 3 inch slewing drive is suitable for solar power system coming with 3- 5 m2 solar panel, 7 inch for 10-17 m2 solar panel, 9 inch for 18-30 m2, 12 inch for 31-45 m2, and 14 inch for 46-60 m2. These are provided for your reference. For more specific and detailed information, please contact me directly.Slewing drive is usually composed of a slewing ring, worm, casting housing, and standard components like bearing and bolts, etc. While used in photovoltaic power generation system, the slewing drive is usually used in combination with DC planetary speed reducer motor and AC speed reducer motor. While used in engineering equipment, it is regularly used in combination with hydraulic motor to function as power driving system.

We are committed to researching, developing and applying high quality, precision transmission equipment products,who provides reliable mechanical actuator for horizonal single axis, dual-axis photovoltaic tracking system, CSP,CPV solar tracking design.Our professional and high-quality products will be also applied well as a steady solution on aerial working platform, truck crane, timber grab, drilling rig, spray equipment, hydraulic module vehicle,automated assembly lines, wind yaw systems,etc.
 

Our Services & Strength

1. Raw material from reliable suppliers; 
2.Production process is in strict accordance with ISO9001 Quality Management System . 
3.Strict in-process quality control and 100% finished product inspection before delivery; 
4.Third party product inspections are acceptable CZPT customer request. 
5.Adoption of standardized product design process and APQP, PPAP, FEMA for application analysis.
 

FAQ For Coresun Drive

1. How to deal with the quality problem?

A. We perform APQP at early stage in each project. B. Our factory must fully understand the quality concerns from customers and implement product & process quality requirements.

C. Our quality professionals who perform patrol inspection in our factories.We perform final inspectors before the goods are packed. D. We have 3rd party inspectors who perform final audit checks on the packed goods prior to dispatch from China. 2. Can you take responsibility for me?Of course, I’m happy to help you! We take responsibility for my products. 3. Do you like to serve the client only with small order?We enjoy to grow up together with all our clients whatever big or small.Your will become bigger and bigger to be with us.

VH series slewing drive is the updated model on the basis of VD and VE slewing drive.VH7 slewing drive gear motor has the higher holding toque and output torque. It’s very important for ensuring the steady operation of single axis solar tracker system. Generally, we use it for 60-100pcs 1P and 2P single axis solar tracker design.

Coresun Drive Slewing Drive Motor Production Photo and Application

Coresun Drive solar tracker actuator slewing drive gear motor with 24VDC 220VAC motor is certificated by CE

CONTACT US

It is sincerely looking CZPT to cooperating with you for and providing you the best quality product & service with all of our heart!

Slewing Drive: Solar Tracker Actuator
Solar Tracker: Single Axis Solar Tracker System
Output Torque: 6300n.M
Output Speed: 0.025rpm
Transport Package: Wooden Case
Specification: VH7-60S92-RC-2415300
Customization:
Available

|

Customized Request

gear gearbox

What are the considerations for choosing the appropriate lubrication for gear reducers?

Choosing the appropriate lubrication for gear reducers is crucial for ensuring optimal performance, longevity, and efficiency. Several considerations should be taken into account when selecting the right lubrication:

1. Load and Torque: The magnitude of the load and torque transmitted by the gear reducer affects the lubrication’s viscosity and film strength requirements. Heavier loads may necessitate higher viscosity lubricants.

2. Operating Speed: The speed at which the gear reducer operates impacts the lubrication’s ability to maintain a consistent and protective film between gear surfaces.

3. Temperature Range: Consider the temperature range of the operating environment. Lubricants with suitable viscosity indexes are crucial to maintaining performance under varying temperature conditions.

4. Contaminant Exposure: If the gear reducer is exposed to dust, dirt, water, or other contaminants, the lubrication should have proper sealing properties and resistance to contamination.

5. Lubrication Interval: Determine the desired maintenance interval. Some lubricants require more frequent replacement, while others offer extended operational periods.

6. Compatibility with Materials: Ensure that the chosen lubricant is compatible with the materials used in the gear reducer, including gears, bearings, and seals.

7. Noise and Vibration: Some lubricants have properties that can help reduce noise and dampen vibrations, improving the overall user experience.

8. Environmental Impact: Consider environmental regulations and sustainability goals when selecting lubricants.

9. Manufacturer Recommendations: Follow the manufacturer’s recommendations and guidelines for lubrication type, viscosity grade, and maintenance intervals.

10. Monitoring and Analysis: Implement a lubrication monitoring and analysis program to assess lubricant condition and performance over time.

By carefully evaluating these considerations and consulting with lubrication experts, industries can choose the most suitable lubrication for their gear reducers, ensuring reliable and efficient operation.

gear gearbox

What factors should be considered when selecting the right gear reducer?

Choosing the appropriate gear reducer involves considering several crucial factors to ensure optimal performance and efficiency for your specific application:

  • 1. Torque and Power Requirements: Determine the amount of torque and power your machinery needs for its operation.
  • 2. Speed Ratio: Calculate the required speed reduction or increase to match the input and output speeds.
  • 3. Gear Type: Select the appropriate gear type (helical, bevel, worm, planetary, etc.) based on your application’s torque, precision, and efficiency requirements.
  • 4. Mounting Options: Consider the available space and the mounting configuration that suits your machinery.
  • 5. Environmental Conditions: Evaluate factors such as temperature, humidity, dust, and corrosive elements that may impact the gear reducer’s performance.
  • 6. Efficiency: Assess the gear reducer’s efficiency to minimize power losses and improve overall system performance.
  • 7. Backlash: Consider the acceptable level of backlash or play between gear teeth, which can affect precision.
  • 8. Maintenance Requirements: Determine the maintenance intervals and procedures necessary for reliable operation.
  • 9. Noise and Vibration: Evaluate noise and vibration levels to ensure they meet your machinery’s requirements.
  • 10. Cost: Compare the initial cost and long-term value of different gear reducer options.

By carefully assessing these factors and consulting with gear reducer manufacturers, engineers and industry professionals can make informed decisions to select the right gear reducer for their specific application, optimizing performance, longevity, and cost-effectiveness.

gear gearbox

What industries and machinery commonly utilize gear reducers?

Gear reducers are widely used across various industries and types of machinery for torque reduction and speed control. Some common industries and applications include:

  • 1. Manufacturing: Gear reducers are used in manufacturing equipment such as conveyors, mixers, and packaging machines to control speed and transmit power efficiently.
  • 2. Automotive: They are utilized in vehicles for applications like power transmission in transmissions and differentials.
  • 3. Aerospace: Gear reducers are used in aircraft systems, including landing gear mechanisms and engine accessories.
  • 4. Robotics and Automation: They play a crucial role in robotic arms, CNC machines, and automated production lines.
  • 5. Mining and Construction: Gear reducers are used in heavy machinery like excavators, bulldozers, and crushers for power transmission and torque multiplication.
  • 6. Energy and Power Generation: Wind turbines, hydroelectric generators, and other power generation equipment use gear reducers to convert rotational speed and transmit power.
  • 7. Marine and Shipbuilding: They are used in ship propulsion systems, steering mechanisms, and anchor handling equipment.
  • 8. Material Handling: Gear reducers are essential in conveyor systems, elevators, and hoists for controlled movement of materials.
  • 9. Food and Beverage: They find applications in food processing equipment like mixers, grinders, and packaging machines.
  • 10. Paper and Pulp: Gear reducers are used in machinery for pulp processing, paper production, and printing.

These examples represent just a fraction of the industries and machinery that benefit from the use of gear reducers to optimize power transmission and achieve the desired motion characteristics.

China Best Sales Worm Gear Reducer for PV Cpv Solar Tracker   comer gearbox	China Best Sales Worm Gear Reducer for PV Cpv Solar Tracker   comer gearbox
editor by CX 2023-09-08